// You can find instructions for this file at http://www.treeview.net

//Environment variables are usually set at the top of this file.
USETEXTLINKS = 1
STARTALLOPEN = 1
USEFRAMES = 0
USEICONS = 0
WRAPTEXT = 1
PERSERVESTATE = 1
HIGHLIGHT = 1


foldersTree = gFld("", "")
    aux2 = insFld(foldersTree, gFld("Principal", "default.asp"))
 			insDoc(aux2, gLnk("S", "División de Fuerza y Presión", "default.asp"))
			insDoc(aux2, gLnk("S", "Magnitudes", "magnitudes.html"))
			aux3 = insFld(aux2, gFld("Definiciones", ""))
 				insDoc(aux3, gLnk("S", "Presión y Vacio", "Definiciones.html#pyv"))
				insDoc(aux3, gLnk("S", "Fuerza y Par Torsional", "Definiciones.html#fypt"))
				insDoc(aux3, gLnk("S", "Dureza y Tenacidad", "Definiciones.html#dyt"))
	
    aux2 = insFld(foldersTree, gFld("Patrones Nacionales", "pat_nal.html"))
 			insDoc(aux2, gLnk("S", "Presión y Vacío", "pyv.html"))
 			insDoc(aux2, gLnk("S", "Fuerza y Par Torsional", "fypt.html"))
 			insDoc(aux2, gLnk("S", "Dureza y Tenacidad", "dyt.html"))
    aux2 = insFld(foldersTree, gFld("Laboratorios", ""))
		aux3 = insFld(aux2, gFld("Patrones Nacionales", ""))
			insDoc(aux3, gLnk("S", "Presión y Vacío", "pat_nal_lab.html"))
			insDoc(aux3, gLnk("S", "Fuerza y Par Torsional", "fypt_lab.html"))
     	aux3 = insFld(aux2, gFld("Patrones de Referencia", ""))
		  	insDoc(aux3, gLnk("S", "Presión y Vacío", "presionyvacio.html"))
			insDoc(aux3, gLnk("S", "Fuerza y Par Torsional", "labpartorsional.html"))
	  		insDoc(aux3, gLnk("S", "Dureza y Tenacidad", "pat_ref_lab.html"))
	aux2 = insFld(foldersTree, gFld("Servicios", ""))
 			insDoc(aux2, gLnk("S", "Cursos", "cursos.html"))
 			insDoc(aux2, gLnk("S", "Entrenamiento", "entrenamiento.html"))
		aux3 = insFld(aux2, gFld("Calibración", ""))
				insDoc(aux3, gLnk("S", "Presión y Vacío", "cal.html"))
 				insDoc(aux3, gLnk("S", "Fuerza y Par Torsional", "fypt_c.asp"))
 				insDoc(aux3, gLnk("S", "Dureza y Tenacidad", "dyt_c.asp"))
 			insDoc(aux2, gLnk("S", "Asesoría", "ase.html"))
 			insDoc(aux2, gLnk("S", "Evaluaciones", "eval.html"))						  
 			insDoc(aux2, gLnk("S", "Estancias", "est.html"))			
		aux3 = insFld(aux2, gFld("Proyectos", ""))
 				insDoc(aux3, gLnk("S", "Presión y Vacío", "pro.html"))
 				insDoc(aux3, gLnk("S", "Fuerza y Par Torsional", "fypt_p.html"))
	aux2 = insFld(foldersTree, gFld("Información Técnica", "info_tec.html"))
 			insDoc(aux2, gLnk("S", "Presión y Vacío", "info_tec.html#pyv"))
 			insDoc(aux2, gLnk("S", "Fuerza y Par Torsional", "info_tec.html#fypt"))
 			insDoc(aux2, gLnk("S", "Dureza y Tenacidad", "info_tec.html#dyt"))			
foldersTree.treeID = "t1"